Need help?Do you have a question about the EnGenius EWS660AP and is the answer not in the manual?
General| Model | EWS660AP |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| Mounting Options | Ceiling, Wall |
| SSID | Up to 16 |
| VLAN Support | Yes |
| Power over Ethernet (PoE) | 802.3af/at |
| Antenna Type | Internal |
| Antenna Gain | 5 dBi (5 GHz) |
| Management | EnGenius Cloud |
| Security | WPA3 |
| Operating Modes | Access Point, Mesh |
| Ethernet Ports | 1 x Gigabit Ethernet |
Details the main functionalities and advantages of the EWS660AP, including its rugged design and performance.
Guides users on environmental factors and placement strategies for optimal wireless signal performance.
Details the necessary TCP/IPv4 configuration steps for Windows and Mac operating systems.
Provides step-by-step instructions for physically connecting and powering the Access Point.
Explains methods for securely mounting the device on walls or poles using provided accessories.
Guides users on how to access and log in to the device's web-based management interface.
Configures the IPv4 network parameters such as IP address, subnet mask, and gateway.
Manages SSIDs for both 2.4GHz and 5GHz bands, including security and VLAN settings.
Sets up various security modes like WEP, WPA/WPA2-PSK, and WPA/WPA2-Enterprise for wireless networks.
Allows changing the administrator username and password for secure device access.
Provides instructions for updating the Access Point's firmware to the latest version.
Enables saving and loading device configurations for backup and recovery purposes.
Allows rebooting the device or restoring it to factory or user default settings.
To Next Page