ENGWE MTB26 - Meter Operation

4
Meter Operation
1. Meter Instruction
2. Meter Operation
3. Operation Cautions
Be careful of the safety use. Don’t attempt to release the connector when charging
the battery.
●Avoid the risk of collision.
●Don’t modify system parameters to avoid parameters disorder.
Operating instructions
To switch on/off
the E-Bike
system, hold the
“M” button for 2s.
The default value
is “low” pedal
assist level.
Press “+” to
crease into pedal
assist level
“Mid”.
Press “
+
”
again to move
into pedal
assist level
“High”. “High”
is the
maximum
power of PAS.
Full Electric
Function (Pure
electric mode):
Press“
-
”, until all
the three
“low”,“Mid”,
“High” indicators
are off.