ENHANCED VISION Pebble HD - Turning Key Click On;Off; Color Mode Selection

3) Press the [+] SIZE button to outline the desired
brightness setting with a White Box.
4) Press the [+] SIZE button to set the desired setting.
5) Press the Red [FREEZE] button to exit and resume
normal operation of your Pebble HD.
Note: By lowering the LCD brightness setting you can extend the
battery running time of the Pebble HD.
Turning Key Click On/Off
1) Enter the Pebble HD Menu by pressing the [MODE]
and Red [FREEZE] buttons.
2) Rotate the [SCROLL Wheel] clockwise to ‘KEY CLICK
ON’. With ‘KEY CLICK ON’ highlighted, press the [+] SIZE
button to Enable/Disable KEY CLICK ON
3) Press the Red [FREEZE] button to exit the menu and
save your KEY CLICK settings
Color Mode Selection:
Your Pebble HD has 4 set viewing modes (Full-color,
Black & White Mode, Positive Mode and Negative
Mode). Three of these can be enabled or disabled in the
Pebble HD Menu.
There are also 3 additional color modes that can be
changed to any of the 28 available. Use the following
procedure to select between the 28 available color
modes:
1) Enter the Pebble HD Menu by pressing the [MODE] and
Red [FREEZE] buttons.
2) Rotate the [SCROLL Wheel] clockwise until Color Select
is highlighted and press the [+] SIZE button.
Chapter 4 Using the Menu 25