To Next PageTo Next Page
Need help?Do you have a question about the enorossi DM Series and is the answer not in the manual?
Contact details for technical assistance and support from the manufacturer.
Explanation of CE marking and the manufacturer's declaration of conformity.
Details the manual's purpose, safety role, and intended users for proper operation.
Installation of the protection support and the protection bar on the machine.
Mounting the support rod and assembling the side rake disc unit.
Installation of the internal cone disc and the lower slide and protection plate.
Mounting the internal protective flap and the belt protection case.
Hooking the compensating spring and assembling the release cord and hydraulic pipe.
Assembly of front, rear, and tarpaulin protection guards and rods.
Blade assembly, protective guard insertion, and pin installation.
Steps for connecting the mower's lifting arms and 3rd point to the tractor.
Connecting the cardan shaft and adjusting the machine's lift position.
Adjusting frame height for tractors with hydraulic lift position control.
Adjusting frame height for tractors without hydraulic lift position control.
Procedure for checking and adapting the cardan shaft length for proper fit.
Using the support chain to prevent rotation of the protection tube.
Steps to move the mower from work position to transport position.
Lifting the mower to a vertical position for secure transport.
Procedures to transition the mower from transport to active work position.
Checking tarpaulin carrier and frame height after switching to work position.
Ensuring guards are lowered, tarpaulin covers cutting bar, and no persons are near.
Connecting PTO, managing advancement speed, and using hydraulic floating position.
Reducing PTO speed, disconnecting PTO, and raising the mowing bar.
Adjusting the side rake disc position for optimal forage and windrow management.
Adjusting the mowing bar tilt via the 3rd point to set the cutting height.
Understanding the safety hook's operation and checking moving parts lubrication.
Adjusting the spring tension by setting the distance of washers to the spring.
Checking discs, blades, and fastening screws for wear and damage.
Regular inspection of blade pins for deformation or wear.
Checking fastening screws and replacing nuts with lost elasticity or wear.
Procedure for removing and replacing worn or damaged blades.
Guidelines for replacing blades based on wear, size, and hole ovalization.
Importance of regularly checking the tightness of all fastening screws and nuts.
Checking and adjusting belt tension to prevent slippage.
Adjusting the tension of the compensating spring for optimal machine balance.
Procedure for checking the oil level in the mowing bar.
Identifying the correct filling cap positions for different mowing bar models.
Procedure for completely replacing the oil in the mowing bar.
Guidance on hot oil replacement, oil types, and quantities for different models.
Checking gear case oil level and lubricating the cardan shaft.
Information on how to contact ENOAGRICOLA ROSSI for customer help and spare parts.
Required information for facilitating assistance and ordering spare parts.
General| Brand | enorossi |
|---|---|
| Model | DM Series |
| Category | Farm Equipment |
| Language | English |
