EasyManua.ls Logo

enorossi EASY RAKE Series - User Manual

enorossi EASY RAKE Series
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER AND MAINTENANCE MANUAL
Assembly instructions
rev 0 – 02/12
Important:
Read all the operating and maintenance instructions in this
manual before assembly (EC Machinery Directive 98/37)

Questions and Answers

  • K
    ksmithAug 4, 2025
    Why is the oil overheating in my enorossi Farm Equipment?
    • A
      Amber SilvaAug 5, 2025
      If the oil in your enorossi Farm Equipment is overheating, this could be due to several reasons. A clogged filter may be the cause, in which case you should replace it. Alternatively, crushed pipes could be restricting flow, so check and replace any damaged pipes. Finally, ensure that the oil level is sufficient and top it up if it is low.
  • D
    Daniel KingAug 11, 2025
    What to do if the jack activation command does not respond on my enorossi Farm Equipment?
    • L
      Lisa MasonAug 11, 2025
      If the jack activation command on your enorossi Farm Equipment is not responding, consider the following potential causes: a low hydraulic oil level, which requires topping up; damaged hydraulic system piping, which necessitates replacement; a damaged hydraulic pump, also requiring replacement; or a clogged filter, which should be replaced.
  • R
    Robert HarrisAug 17, 2025
    How to fix oil loss in enorossi Farm Equipment?
    • A
      Anthony GomezAug 17, 2025
      If you're experiencing oil loss in your enorossi Farm Equipment, it could be due to a slow connection, in which case you should squeeze the pipe. Another possible cause is a worn-out seal, which requires replacement.
  • D
    Donald BurnsAug 23, 2025
    Why do the jacks on my enorossi Farm Equipment only move intermittently?
    • J
      Jennifer VasquezAug 23, 2025
      If the jacks on your enorossi Farm Equipment are moving intermittently, it's likely due to air in the hydraulic circuit. To resolve this, operate the pump at no load for a few minutes, using the jacks, to expel any air in the hydraulic circuit.
  • L
    Logan WilsonAug 28, 2025
    What to do if the jacks move on their own on my enorossi Farm Equipment?
    • H
      hintonraymondAug 28, 2025
      If the jacks on your enorossi Farm Equipment move even when no command is given, it's likely that the jack seals are worn out. The suggested solution is to replace the seals.

Summary

Introduction to the Hay Rake

About Hay Rakes

General information about the agricultural device for collecting cut forage.

About This Manual

Details about the manual's purpose, content, and how to use it.

Manufacturers Warranty

Explains the manufacturer's warranty terms and conditions for the rake.

Safety Guidelines

General Safety Regulations

Outlines essential safety regulations for using the rake.

Handling and Transportation Safety

Provides safety guidelines for moving and transporting the rake.

Installation Procedures

Rake Assembly

Step-by-step instructions for assembling the rake.

Hitching to the Tractor

Guidance on securely attaching the rake to an agricultural tractor.

Hydraulic Connections

Instructions for making the necessary hydraulic connections.

Operation and Use

Preliminary Information for Operation

Important preliminary information before operating the rake.

Rake Operation

Detailed instructions on how to operate the rake in the field.

Maintenance Instructions

General Maintenance Guidelines

General rules and guidelines for performing maintenance on the rake.

Scheduled Maintenance Checks

Outlines maintenance checks based on daily, monthly, and annual schedules.

Machine Assembly Instructions

Assembly 1: Main Frame Assembly

Instructions for assembling the main frame and initial components.

enorossi EASY RAKE Series Specifications

General IconGeneral
Brandenorossi
ModelEASY RAKE Series
CategoryFarm Equipment
LanguageEnglish

Related product manuals