To Next PageTo Next PageWhy do the windrow tines on my enorossi Farm Equipment wear out so quickly?
If the tines are continually making contact with the ground, it can cause rapid wear. Adjust the height of the windrow tines from the ground to prevent this. Please refer to the relevant paragraph on page 29 for detailed instructions on adjusting the height.
What to do if my enorossi RR 420 EVO Farm Equipment isn't collecting forage properly?
If the forage is only being partially or insufficiently collected, it may be because the windrow tines are too high off the ground. To fix this, adjust the height of the windrow tines from the ground. See the relevant paragraph on page 29 for detailed instructions.
How to fix jerky movement of cylinders on my enorossi Farm Equipment?
If the cylinders are moving jerkily, it is caused by air in the hydraulic circuit. To resolve this, run the rotary windrow rake without any load for a few minutes to purge the air from the hydraulic circuit. Also, check the hydraulic oil level in the tractor's reservoir.
General| Brand | enorossi |
|---|---|
| Model | RR 420 EVO |
| Category | Farm Equipment |
| Language | English |
Official statement confirming the equipment meets EU safety requirements and directives.
Details compliance with EU directives and relevant industry standards for safety.
Explains the manual's purpose, content, and importance for safe operation.
Explains the meaning of symbols, notes, and safety labels used in the manual and on the equipment.
Lists and describes the primary parts of the windrow rotary rake and its technical specifications.
Outlines the warranty period, coverage, and conditions for the windrow rotary rake.
Provides fundamental safety guidelines for operating the windrow rotary rake.
Covers precautions for safely moving the equipment during transport and operation.
Defines the proper application of the equipment and necessary usage warnings.
Outlines the operator's duties and liabilities for safe and proper use.
Guides on setting up the machine for work and the operational steps.
Details how to adjust tines, deflectors, and jacks for effective windrow formation.
Details the process of installing the windrow rotary rake on a tractor.
Details routine maintenance, safety measures during servicing, and component replacement.
Lists common problems, their causes, and recommended solutions.
Provides guidance for environmentally responsible disposal of equipment materials.
