How to fix jerky ram movements in enorossi G4V-3P?
If the rams on your enorossi Farm Equipment are moving jerkily, it could be due to air in the hydraulic circuit. Try running the hay tedder vacuum for several minutes to bleed the air. Also, ensure that the oil level in the tractor's hydraulic tank is sufficient.
What to do if a ram moves without being activated on my enorossi Farm Equipment?
If a ram on your enorossi Farm Equipment moves without being activated, it could be caused by worn-out ram seals. Consider replacing the seals. Also, verify that the teeth are not set too high from the ground level and check the oil level in the tractor's hydraulic tank.
Lists EN standards consulted for EC conformity of the hay tedder.
Details about the agricultural equipment, its models, and intended use.
Explains the manual's role in safe operation, maintenance, and safety regulations.
Information on identification plates, serial numbers, and EC certifications.
Lists major components and technical specifications for different hay tedder models.
Outlines the terms, conditions, and validity of the hay tedder warranty.
Mandatory safety standards, operator qualifications, and basic rules for safe use.
Precautions for safe handling during transport, loading, unloading, and movement.
Guidelines for proper use of the tedder and essential handling precautions to prevent accidents.
Identifies prohibited uses and limitations to ensure safe and effective operation.
Defines the operator's duties and accountability for safe operation and maintenance.
Explains the meaning and importance of various safety pictograms and warning labels.
Information on noise generated by the machine and tractor, and hearing protection advice.
Initial steps and requirements before proceeding with hay tedder installation.
Detailed instructions for attaching the hay tedder to the tractor's hitch.
Instructions for properly fitting and adapting the cardan shaft for PTO connection.
Steps for connecting the hydraulic and electrical systems for operation.
Step-by-step instructions for detaching the hay tedder from the tractor.
Guidelines for safely storing the hay tedder when not in use.
Initial checks and setup procedures before starting operation.
How to configure the hay tedder's working parts for optimal performance.
Details on the tedding process, field adjustments, and their effects.
Instructions for modifying the tilt angle of rotary groups for better ground contact.
Procedures for safely changing the direction of movement or reversing the tractor.
Steps to safely fold and secure the hay tedder for transport.
Steps to follow at the end of the work day, including shutdown and parking.
Essential safety measures to ensure safe maintenance operations.
Regular checks, lubrication points, and tasks for optimal performance.
Step-by-step guide for removing and replacing hay tedder teeth.
Identifies common problems and provides solutions for the hay tedder.
Guidelines for environmentally responsible disposal of machine components.
General| Brand | enorossi |
|---|---|
| Model | G4V-3P |
| Category | Farm Equipment |
| Language | English |
To Next Page