View or Change Wi-Fi Settings
When the Envoy is using Wi-Fi to connect with Enlighten,
select > to view Wi-Fi configuration information. From here
you view Available Networks (WPS and AP), Update Country,
Enable AP Mode, and view Device information.
If you replace the broadband router at the installation site, you
need to update the connection information on the Envoy-S. To
do this:
Select Connect Other Network.
Enter the new Wireless Network Name (ESSID) and
Security code.
If you need to disconnect the Envoy from a Wi-Fi network:
Select More Info.
Click Forget this Network.
To Next Page
Loading...
Need help?
General