enphase Envoy R Standard User Manual

12
7) Enter the password and click connect.
a) If successful go to step 7. If the connection is unsuccessful, click on “Connect Other Network”
which should appear at the end of the list of available Wi-Fi networks.
b) Enter the network name into “Name (ESSID)” and network password manually.
c) For the “Security” setting, select “WPA Personal”.
d) For the “WPA Algorithm” setting select “TKIP” (this setting appears after you have selected a
security setting).
e) Click “Connect”. If the test is unsuccessful again, repeat steps A to C but change the “WPA
Algorithm” to “TKIP + CCMP” and click “Connect”.

enphase Envoy R Standard Specifications

General

Brand	enphase
Model	Envoy R Standard
Category	Gateway
Language	English