Need help?Do you have a question about the Enraf Nonius Sonopuls 692 and is the answer not in the manual?
General| Frequency | 1 MHz and 3 MHz |
|---|---|
| Treatment Time/Timer | 1 to 30 minutes |
| Number of Channels | 1 |
| Mains Frequency | 50/60 Hz |
| Display | LCD |
| Device Type | Ultrasound Therapy Device |
| Pulse Frequency | 100 Hz |
| Mains Voltage/Power Supply | 100-240 V AC |
Describes the electrotherapy module with two independent current channels.
Details the multi-frequency ultrasound channel and its capabilities.
Details the EMG module for surface/vaginal/anal electrodes and feedback.
Lists crucial warnings for device operation and environment.
Provides important cautions for handling and operating the device safely.
Explains electrotherapy for pain relief, including indications and contraindications.
Details using electrotherapy for muscle stimulation and related parameters.
Explains ultrasound therapy for pain relief and muscle relaxation.
Lists indications, contraindications, and adverse effects for ultrasound therapy.
Explains combined ultrasound and electrotherapy for muscle spasm reduction.
Lists indications, contraindications, and warnings for Myofeedback therapy.
Details how to connect the unit to the mains power supply.
Identifies and explains the function of each operator control on the device.
Outlines fundamental steps for operating the device.
Details how to access and use electrotherapy functions.
Details how to access and use ultrasound therapy functions.
Details how to access and use combination therapy functions.
Details how to access and use StatUS therapy functions.
Introduces Feedback Therapy and its setup.
Explains the Myofeedback + Stimulation mode.
Instructions for routine user maintenance of the apparatus.
How to clean the main unit of the apparatus.
How to clean the display panel carefully.
How to clean electrodes and accessories after use.
How to clean and maintain the ultrasound treatment head.
Information on diagnosing and resolving common issues.
How to interpret and respond to error codes displayed on the unit.
Steps to resolve issues with insufficient or no output current.
To Next Page