Enso FE3500 Wireless Adjustable Base - Remote Pairing Procedure

PAIRING REMOTE
STEP 1
Make sure the baeries work fine. Replace them when needed.
STEP 2
Plug the power cord to the power source.
The original remote that comes in the box is already paired to the foundaon. No further acon is required.
In the event that the remote is not paired with the foundaon, follow the steps below.
STEP 3
Press and hold head li and foot li simultaneously, then press and hold the buon on the cord of control
box for 3 seconds unl your hear 2 beeps sound, the remote is then paired.
Pairing Button
14-23
10
MI N
20
MI N