13-16
Synchronizing Two Bases
STEP 1
Plug A and B bases to power source.
STEP 2
Make sure remote A was already paired to Base A and Remote B
was paired to Base B. If not, please pair them by following the
pairing remote instrucons on page 12.
Remote A Remote B
Pair remote A to Base B, then base A and base B can be
simultaneous operated by Remote A.
STEP 3
Remote A
P
a
irin
g
Base B
Base A
Base B
Base A
If you want to operate the beds separately, only need to use
another remote to be paired to one of the beds.
STEP 4
To Next Page
Loading...
