Enso flex EZZ FE1200 - Headboard Bracket Installation Guide; Bracket Alignment and Securing; Attaching T-Brackets; Connecting Headboard to Brackets

19-22
Headboard Bracket Installation Guide
STEP 1
The headboard bracket will have 2 long slots to accomodate
any frame type. Align the appropriate slots on the bracket with
the holes on the bed. Use bolts and nuts to secure the bracket.
Make sure the bolts are ght.
STEP 3
You may now connect your headboard to the aachment plates using the remaining bolts and nuts to secure it to the brackets. The
heads of the bolts will face outward. Use a 1/2" (13 mm) socket and 1/2" (13 mm) wrench to ghten the bolts.
STEP 2
To put the T-Bracket and Headboard Bracket together, you will
need (2) bolts and (2) nuts. Slip the bolts through the holes from
T-Bracket to Headboard Bracket with the head of bolt facing
outward. Use 1/2'' (13mm) socket and 1/2'' (13mm) wrench to
ghten the bolts.
Headboard brackets are an oponal accessory and are not included.
A 1/2'' (13 mm) socket and 1/2'' (13 mm) crescent wrench are necessary to complete installaon.
HEADBOARD BRACKET COMPONENTS
(2) Headboard Brackets (2) T-Brackets
(12) Short Bolts
(12) Nuts