10
A Y-Cord is included with Twin Long and Split Cal King bases only (not available on Queen, Full or Full-Long size
bases). The Y-Cord connects two bases to a single remote for the synchronization of two bases.
Locate the wired control plug (connected to the motor). Plug end
of y-cord into wired control plug. Repeat for other end of cord and
wired control plug from second motor.
Once the remote has been connected to the control box with the
y-cord, plug bases into power outlet and test all functions.
Plug remote into Y-Cord
Unplug bases from power source.
STEP 3
STEP 2
STEP 1 STEP 4
syncing two bases (optional)
Remote
Y-Cord
Motor
Bed A
Motor
Bed B
To Power
Supply
To Power
Supply
To Next Page
Loading...
