7
installation guide
To install the legs, thread the washer over the bolt of the leg with
the recessed side facing the leg, and tighten by hand.
Do not over tighten.
9 inch leg
9 inch leg install
3 or 6 inch leg install
3 inch leg
6 inch leg
STEP 1
STEP 2
With the help of an able-bodied assistant, place the carton on the
floor with the arrows pointing downwards.
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects.
Remove the bed base from the box keeping the bottom of the
base facing upwards.
STEP 3
To install headboard brackets see instructions on page 11.
For customer support, visit www.ergomotion.com or call: 1-844-534-3676
Install short (1 inch) leg spacer onto frame mounting points.
Do not over tighten.
STEP 4
To Next Page
Loading...
