ENSONIQ SQ-R User Manual

, I
SQ-R Musician's Manual
Section 7 - Drum Sound Programming
Wave Class/Wave Name
Wave Bank
|Wave Class!
Wave Class
Note:
Wave Name
Wave=5TRING WfiUE
STRING ENSEMBLE
This parameter determines the class of waveforms which will be used for a
particular voice. By selecting this parameter, you can use the Up/Down
Arrow buttons to scroll quickly through the different wave classes to the
category you want. Then select the wave name to choose a specific wave from
that category.
Whenever the wave class is changed, the first wave in that class is selected, and
lower-line parameters are reset to the default values of the new wave class.
The SQ-R waves are divided into 11 categories, or Wave Classes:
These wave classes contain samples of real acoustic and electronic sounds, which
can be used as the basis for a wide variety of realistic musical sounds. Where
necessary, these waves have been multisampled (sampled at many points
through the range of the instrument) for maximum authenticity in reproducing the
original.
(A descriptive list of Wave Classes can be found in the preceding section on
Standard sound programming).
Waves found in the TRANSWAVE and MULTI-WAVE categories cannot be
selected as voices for Drum sounds.
Here you select the actual wave which the voice will play. When this parameter is
underlined, pressing the Up/Down Arrow buttons will scroll through the
individual waveforms within the selected wave class, then cross over into the next
class.
(A chart showing the complete list of waves available can be found in the
preceding section on Standard sound programming.)
Drum Programming
7 - 5

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English