ENSONIQ SQ-R User Manual

SQ-R Musician's Manual
Section 3 - Presets
.
Mix Bank
The Mix bank is used to control the output aspects of the sounds in presets and
sequences. Parameters found in the Mix bank include volume, panning, output,
timbre, etc.
To enter the Mix bank from the Parameter bank, hold down the Bank Select
button. The screen displays the name of the current bank, which should be
PARAM. While the button is held, press the Up Arrow button.
y
Volume
Mix Bank
Volume
The Volume screen enables you to make volume changes to the individual tracks,
allowing you to balance the SQ-R sounds and/or control the volume of external
MIDI devices.
Range: 0to99
All tracks whose MIDI Status is set to MIDI or BOTH will send a MIDI Volume
Change message (controller #7) with the indicated value whenever this parameter
is edited. Preset tracks will also send the current volume for each track when a
preset is selected.
Pan
Mix Bank
Pan
Track 1
Pan = SOUND
OH
The Pan screen gives you control over the placement of the track's sound in a
stereo field.
When a track is set to SOUND, the voices of a sound are panned according to the
settings originally programmed in the Output bank for each voice. Setting this
parameter to any other pan value will override the original settings and will force
ALL of the voices of the program to be panned to that location.
Range: -98 (hard pan left) to +99 (hard pan right).
A setting of +00 places the sound in the center of the stereo field. The minimum
setting is SOUND which indicates that the individual voice's pan settings will be
used.
M
Performance Parameters
3 - 15
.M!

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English