ENSONIQ SQ-R User Manual

Section 3 - Presets
SQ-R Musician's Manual
Selecting Presets
r
Press Select Preset. The LED above the Select Preset button lights and the
following screen appears:
Preset Location
PSETT0Q
<PRESET NRME>
Whenever the Select Preset LED is solidly lit, this indicates that the SQ-R is in
Preset Select mode, and the Up/Down and Left/Right Arrow buttons will
now select presets (rather than selecting sounds, as they do when the Select
Sounds LED is lit). The Left/Right Arrow buttons move through the
presets in increments of 10, while the Up/Down Arrow buttons scroll through
each preset individually.
Each time a new preset is selected, the following things occur:
• a new preset effect is loaded,
• new sounds are loaded into each track and program changes are sent via the
MIDI Out jack on any track in which the status is set to MIDI or BOTH, and
• MIDI Volume, Timbre, and a sustain release command are sent via the MIDI
Out jack on any track in which the status is set to MIDI or BOTH.
r
Editing Presets
Presets are at the foundation of many of the most powerful features of the SQ-R,
such as multi-timbral sound generation and Smart Transmit. Editing presets
enables that power to be extremely flexible.
One of the most basic editing features is the process of turning individual tracks
on and off within a preset. While this can be done from the MIDI Status
parameter in the PARAMeter bank (discussed later in this section), there is a very
quick method to accomplish this from the Preset Select screen. Let's look at it
again:
Preset Location I
Track Status!
PSET 09 1
PRESET-00
(Preset Namel
Across the lower line, the display shows the name of the preset. On the top line
you see the current preset's location and the status of each track.
3 - 2
Selecting Presets

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English