Need help?Do you have a question about the Entel HT446 Series and is the answer not in the manual?
General| Brand | Entel |
|---|---|
| Model | HT446 Series |
| Category | Transceiver |
| Language | English |
Explains "CE" marking on serial number label for compliance.
Details Entel UK Limited's declaration for the product's compliance.
General advice for using the transceiver safely and correctly.
Locations where the transceiver must be turned off.
Precautions to avoid damage or burns.
Guidance on environmentally friendly disposal of the transceiver.
Introduces the Li-Ion battery supplied with the radio.
Safety precautions for charging and handling the battery pack.
Storage and usage advice for the battery pack.
Explains the battery microprocessor and charge cycle notifications.
Lists available battery and charger accessories.
Lists carrying cases and belt clips.
Lists various audio accessories for the radio.
Instructions for attaching and removing the battery.
Instructions for attaching and removing the belt clip.
Instructions for attaching and removing audio accessories.
Guidance on charging the radio using available chargers.
Steps to power on the radio.
Procedure for transmitting and receiving calls.
Explanation of the transmit time limit feature.
Describes the confirmation beep for button presses.
Explains the function of the channel monitor button.
Describes the alerts for a low battery status.
How to activate and cancel the panic alarm siren.
How to enable and disable the button lock feature.
Explains the voice scrambler feature for privacy.
How to use the channel scanning feature.
How to remove interfering channels from scan lists.
Explains CTCSS/DCS for filtering transmissions.
How to use VOX for hands-free transmission.
How to check and change radio frequencies.
Notes on setting DCS tones to normal or inverted.
Steps to clone radio settings between units.
Details the data transfer process for cloning.
How to check and change radio frequency and tone settings.
Steps to clone radio settings between units.
Details the data transfer process for cloning.
To Next Page
