18
IP2160EN - 2013-10-31
For any problems and/or information, contact the support service.
Installer's stamp Operator
Date of intervention
Technician's signature
Customer's signature
Intervention performed
DETACH AND DELIVER TO THE CUSTOMER
Manual release instructions
In the event of a fault or power failure, insert the key and
turn it clockwise and completely open the panel. Manually
open the gate.
To lock the gate again, close the hatch, turn the key anticlock-
wise and remove the key.
WARNING: carry out the wing blocking and release
with the motor switched off. Do not enter within the
operating range of the wing.
When the panel is closed but the key is still hori-
zontal, the release microswitch is open and all ma-
noeuvres are prevented.
Entrematic Group AB
Lodjursgatan 10
SE-261 44, Landskrona
Sweden
www.ditecentrematic.com
To Next Page
Loading...
Need help?
General
