Need help?Do you have a question about the Entrematic Ditec NES600EH and is the answer not in the manual?
General| Power Supply | 230V AC |
|---|---|
| Motor Voltage | 24V DC |
| Max Gate Weight | 600 kg |
| Operating Temperature | -20°C to +55°C |
| Voltage | 230V AC |
| Safety Features | Obstacle detection |
| Control Options | Remote control, Push button |
| Control Type | Electronic control unit |
Details compliance with the Machine Directive 2006/42/EC and installer obligations.
Explains service class, applications, and performance characteristics for different operating conditions.
Identifies key components and outlines basic power connection requirements for installation.
Ensures gate stability, guide condition, and proper fitting of stops and safety edges before installation.
Details on how to insert and fix anchor ties and screws for the base plate, including concrete preparation.
Instructions for placing, adjusting (horizontal/vertical) the gearmotor on the base plate and securing it.
Steps for placing the rack, aligning it with the pinion, adjusting gearmotor for play, and lubricating.
Explains that NEOS gearmotors use encoders and how the gate behaves near end stops.
Guides on installing and adjusting magnetic limit switch brackets for precise gate stopping.
Step-by-step instructions for installing the chain drive kit, including removing the pinion and fitting components.
Details on connecting the chain to the gate wing, securing it, and ensuring proper tension and lubrication.
Essential precautions for safe operation, maintenance, and disposal of the automated gate system for end-users.
To Next Page
