Need help?Do you have a question about the Entrematic Ditec NES400EHJ and is the answer not in the manual?
General| Operating Temperature | -20°C to +55°C |
|---|---|
| Protection Rating | IP54 |
| Max. Leaf Weight | 400 kg |
| Encoder | Yes |
| Power Supply | 230 V AC |
| Max Gate Weight | 400 kg |
| Motor Type | DC |
| Control Options | Radio Remote Control, Key Switch, Push Button |
| Type | Electromechanical Swing Gate Opener |
| Max. Leaf Length | 4.5m |
| Protection Class | Class I |
| Maximum Leaf Width | 4.5m |
Precautions integral to the product for safe installation, use, and maintenance by the user.
Installer obligations under the Machinery Directive for motorizing doors/gates.
Details on service class and applications for automatic entrances like apartment blocks and industrial areas.
Checks for wing stability, sliding wheels, guides, and fitting of stops and safety edges.
Instructions for inserting anchor ties, securing base plates, and making concrete bases.
Steps for releasing the gearmotor, adjusting it horizontally and vertically on the base plate.
Procedures for placing, fixing, and adjusting the rack against the gearmotor pinion for smooth movement.
Explanation that NEOS gearmotors use virtual encoders, and mechanical end stops are needed.
How to install and adjust magnetic limit switch brackets on the rack for precise stopping.
Steps for removing the pinion, fixing the supporting plate, inserting pinions, and passing the chain.
Installing LIN2 photocells inside the gearmotor casing for opening/closing movement protection.
To Next Page
