7
ENTRON Controls, LLC. 700230D
7
READ THIS MANUAL COMPLETELY
BEFORE ATTEMPTING TO INSTALL OR OPERATE THE CONTROL.
STORE THIS TECHNICAL INFORMATION IN A PLACE
TO WHICH ALL USERS HAVE ACCESS AT ANY TIME
ENTRON Controls follows the practices of the RWMA for precautionary labeling. See RWMA Bulle-
tins #1 and #5 for a complete description. Observe the WARNING, DANGER, and CAUTION labels
affixed to control to maintain safe operation. ENTRON Controls, LLC. and its affiliates are not re-
sponsible for any harm caused by non-compliance of instructions associated with the aforemen-
tioned labels or signal words to follow.
The signal word DANGER is used to call attention to immediate or imminent hazards which if not
avoided will result in immediate, serious, or personal injury or loss of life. Examples are: exposed
high voltage; exposed fan blades.
The signal word WARNING is used to call attention to potential hazards which could result in
personal injury or loss of life. Examples are: not using proper personal protection; removal of guards.
The signal word CAUTION is used to call attention to hazards which could result in non-life
threatening personal injury or damage to equipment. CAUTION may also be used to alert against
unsafe practices.
The term NOTICE is used for making recommendations on use, supplementary information, or
helpful suggestions. Non-compliance with these recommendations may result in damage to control,
welding machine, or workpiece. ENTRON Controls, LLC. and its affiliates are not responsible for
damage caused by such non-compliance, and warranties may be voided accordingly at the discre-
tion of ENTRON Controls.
WARNING: Individuals with cardiac devices should maintain a safe distance due to strong magnetic
fields arising from resistance welding. The function of cardiac pacemakers and defibrillators may be
disturbed, which may cause death or considerable health damages! These persons should avoid
the welding system unless authorized by a licensed physician.
2.2 Warnings and Labels
To Next Page
Loading...
Need help?
General