Need help?Do you have a question about the Entrotec ELITE and is the answer not in the manual?
General| Brand | Entrotec |
|---|---|
| Model | ELITE |
| Category | Intercom System |
| Language | English |
Guidelines for separating and routing cables from mains power to prevent interference and ensure safety.
Mandates earthing of all metalwork including panels, conduit, and external components for safety.
Warns against using copper-clad imitation cables and provides methods to test cable integrity.
Details the capabilities and components of the ENT07101 Rev 3 PCB, including handset isolation, power, and call handling.
Specifies CW1308 cable requirements for connecting front panels, lock releases, handsets, and ancillary equipment.
Details the function of various terminal block connections (PL1-PL33) and provides important installation notes.
Illustrates the physical layout of the controller, including LCD module, buttons, and power supply considerations.
Provides a typical wiring diagram and critical notes regarding lock contact usage, fire switch inputs, and Secured By Design compliance.
Illustrates detailed wiring schematics for various Entrotec handset models, including ED3+, RH3+, and Entroview series.
Explains how to configure adjustable settings like speech time, call tone duration, lock release times, and video balance.
Step-by-step guide for setting date, time, and programming daily, weekly, and individual day on/off periods for the time clock.
Details connections for auxiliary devices like beacons and doorbells, including critical notes on the use of the EX terminal.
Illustrates wiring for fire switches and push-to-exit buttons, with a table detailing terminal connections for various Entrotec models.
Presents a schematic for the main entrance door, including a cabling table and important notes on cable types and routing.
Identifies key equipment and wiring types, emphasizing the critical requirement for all metalwork and 230V mains input to be earthed.
To Next Page