Entrust Sigma DS4-ES1 Quick Install Guide

Do not continue unpacking this box until you have
read these instructions.
Read and follow these instructions to set up your
Sigma printer.
Sigma DS4 and DS4-ES1 Instant Issuance System
Quick Install Guide
Refer to your ribbon supply box
to prepare the ribbon.
2
Continued
1
b
c
a
The keys unlock the
printer and input hopper
a
b
3
1
2
4
5
6
1 Power supply
2 Power cord
3 USBashdrive
4 USB cable
5 Cleaning swabs
6 Keys
d
1
4
2
3
5
6
3

Entrust Sigma DS4-ES1 Specifications

General

Print Technology	Direct-to-card dye-sublimation/resin thermal transfer
Print Resolution	300 dpi
Connectivity	USB 2.0, Ethernet
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	60°F to 95°F (15°C to 35°C)
Print Capabilities	Single-sided
Card Capacity	Input hopper: 125 cards; Output hopper: 25 cards
Card Thickness	0.010 inches to 0.040 inches (0.25 mm – 1.016 mm)
Card Size	CR-80 (85.6 mm x 54 mm)
Operating System Support	Windows 10, Windows Server 2016, Windows Server 2019
Operating Humidity	20% to 80% (non-condensing)