Connect the Envertech microinverter to the utility grid only after you have completed all installation
procedures and receiving approval from the electric utility company.
Please be kindly noted that the Envertech microinverter itself is a heat sink. Under normal operating
conditions, its temperature is 20°C above ambient, but under extreme conditions the microinverter
can reach a temperature of 80°C.
Do not disconnect the PV module from the Envertech microinverter without rstly disconnecting AC
power.
3.Product Information
2.1 How it Works
The Envertech microinverter maximizes energy production from your photovoltaic
(PV) array. Each Envertech microinverter is individually connected to one PV module in
your array. This unique configuration means that an individual Maximum Peak Power
Point Tracker (MPPT) controls each PV module. This ensures that the maximum power
available from each PV module is exported to the utility grid regardless of the perfor-
mance of the other PV modules in the array. That is, although individual PV modules
in the array may be affected by shading, soiling, orientation, or PV module mismatch,
the Envertech microinverter ensures top performance for its associated PV module.
The result is maximum energy production from your PV system.
You can view the realtime data from a web browser or Envertech app.
This integrated solar system maximizes energy harvest, increases system reliability,
and simplifies design, installation and management.
3.1 Overview
3.2 Major Characteristics
Envertech microinverters have the following characteristics which make Envertech
microinverters “Highly Efficient, Highly Reliable, Highly Cost Effective”:
Low DC input voltage.
Wide MPPT voltage range ensures high yield under various weather conditions.
High MPPT accuracy ensures minimum power loss during converting.
Complete set of protective functions.
Also, the following protective functions are integrated into Envertech microinverters:
Internal overvoltage/undervoltage protection
Faulty grounding protection
Grid monitoring
Current monitoring in grounding
DC current monitoring
EVT360 can be adapted to almost all 60-cell or 72-cell modules. Before installation,
please check the parameters of the microinverters and modules to ensure that they
are compatible.
Once you install EnverBridge and have it connected to your broadband router or
modem, Envertech microinverters automatically begin to report to EnverBridge’s
server. EnverBridge monitoring system presents bothrealtime and history performace
data.
Microinverter systems are inherently more reliable than traditional inverters. The
distributed nature of a microinverter system ensures that there is no single point failure
in the PV system. Envertech Microinverters are designed to operate at full power at
ambient temperatures as high as +65℃(150℉). The microinverter casing is designed
for outdoor installation and complies with the IP67 protection level.
NOTE: To ensure optimal reliability and to meet warranty requirements, the EVT360
microinverter must be installed according to the instructions in this manual.
PV systems using Envertech microinverters are very simple to design and install. You
can install a combination of PV modules of any type, at any orientation and in any
quantity. You won’t need to install cumbersome traditional inverters. Each microin-
verter can be quickly mounted on the PV rack, directly beneath each PV module. Low
voltage DC wires connect from the PV module directly to the co-located microinverter,
eliminating the risk of personnel exposure to dangerously high DC voltage.
2.4 Simple Design
3 4
2.2 Monitoring Device: EnverBridge
2.3 Optimal Reliability
EnverView: IOS, Android App
To Next Page
Loading...
Need help?
General
