Envertech EVT360 User Manual

1.1 Read it First
This manual contains important instructions for installation and maintenance of the
EVT360 microinverter.
To reduce the risk of electrical shock, and to ensure safe installation and operation of
the microinverter, the following safety symbols appear throughout this document to
indicate dangerous conditions and important safety instructions.
The Envertech microinverter system is an on-grid microinverter system with world
top-class technology. This manual gave details about safe installation and operation
of the Envertech Microinverter.
The three key elements of an Envertech microinverter system include :
Do not use Envertech equipment in a manner not specied by the manufacturer. Doing so may cause
death or injury to persons, or damage to equipment.
Be aware that only qualied personnel should install or replace the Envertech microinverters and the
Cable and accessories.
Do not attempt to repair the Envertech microinverter; it contains no user-serviceable parts. If it fails,
contact Envertech customer service to start the replacement process. Tampering with or opening the
Envertech microinverter will void the warranty.
If the AC cable on the microinverter is damaged or broken, do not install the unit.
Before installing or using the Envertech microinverter, read all instructions and cautionary markings
in the technical description and on the Envertech microinverter system and the PV equipment.
Connect the Envertech microinverter to the utility grid only after you have completed all installation
procedures and receiving approval from the electric utility company.
Please be kindly noted that the Envertech microinverter itself is a heat sink. Under normal operating
conditions, its temperature is 20°C above ambient, but under extreme conditions the microinverter
can reach a temperature of 80°C.
Do not disconnect the PV module from the Envertech microinverter without rstly disconnecting AC
power.
2. Envertech Microinverter System
1.2 Safety Instructions
1 2
!
WARNING
DANGER
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
can result in death or serious injury or moderate injury.
NOTICE indicates a situation that can result in property damage,
if not avoided.
!
NOTICE
!
1.Important Safety Information
EnverBridge: monitoring and protecting PV system.
EVT360 microinverter:Converting the DC of the PV module into AC
EnverPortal: http://www.envertecportal.com

Envertech EVT360 Specifications

General

Brand	Envertech
Model	EVT360
Category	Inverter
Language	English