EasyManuals Logo

Envertech EVT800 User Manual

Envertech EVT800
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
11. Verify with your utility company that grid frequency is within the regulated
range.
7.3 Disconnect Microinverters from PV Modules
If your problems are still unsolved with the steps above, please contact
Envertech tech support through www.envertec.com. If Envertech approves the
replacement, please take off the microinverter according to the following
instructions. In order to ensure the disconnection between the microinverter
and the PV Module will not be done while the microinverter is at working status,
please strictly follow the steps below.
1. Turn off AC branch circuit breaker.
2. Disconnect the microinverters in the following procedure.
Pull the AC connectors of both sides of the microinverters in the opposite
direction with appropriate force.
3. Cover the PV module with an opaque, and then disconnect the PV module DC
connectors from the microinverter.
4. Loosen the grounding screw and remove the grounding wire.
5. Take off the microinverter from the PV frame.
8. System Diagram
1. Single phase
3
Junction Box
4
Extention cable 4mm2
Distribution
control box
Grid
5
socket
7
Router
6
RJ45 Cable
2
Microinverter
1
2
User Identific ation Number
-40 to +65
Temperature(
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15AM ax im um U nit s Per Branch: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category: OVC III (AC Mai n), OV C II ( PV)
Ingress Protection (IP):
IP67Prote ctive Class: Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Ltd.
PV Microinverter
1
PV Module
1
PV Module
lenght 295 mm
2
Microinverter
1
2
User Identific ation Number
-40 to +65
Temperature(
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15AM ax im um U nit s Per Branch: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category: OVC III (AC Mai n), OV C II ( PV)
Ingress Protection (IP):
IP67Prote ctive Class: Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Ltd.
PV Microinverter
1
PV Module
1
PV Module
lenght 295 mm
Distribution
control box
Grid
3
Extention cable 4mm2
6
Router
4
RJ45 Cable
5
socket
2
Microinverter
12
User Identification Number
-40 to +65
Temperature():
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPT Voltage Range (Vdc):
22V~48V
Current (Max. Continuous) (A):
3.27A
Max. DC Input (Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
12Ax2
Power Factor Range:
+/-0.90
Max. Input Short-Circuit Current (A):
15A Maximum Units Per Branc h: 6
Power (Max. Continuous) (W):
720W
Overvoltage Category: OVC III (AC Mai n), OVC II ( PV)
Ingress Protection (IP):
IP67 Protective Class: Class I
Model: EVT800
www.envertec.com
Zhejiang Envertech Corporation Ltd.
PV Microinverter
1
PV Module
1
PV Module
lenght 295 mm

Other manuals for Envertech EVT800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Envertech EVT800 and is the answer not in the manual?

Envertech EVT800 Specifications

General IconGeneral
BrandEnvertech
ModelEVT800
CategoryInverter
LanguageEnglish

Related product manuals