4.2 Product Description
4.3 Further Information
If you have any further questions concerning accessories or installation, please
check our website www.envertec.com or send an email to tech@envertec.com
.
4.4 Symbols on Inverter
Symbol
Description
Dangerous electrical voltage
This device is directly connected to public grid, thus
all work related to the inverter shall only be carried
out by qualified person
NOTICE, danger!
This device directly connected with electricity generators and
public grid
Danger of hot surface
The components inside the inverter will release a log of heat
during operation. DO NOT touch aluminum casing during
operating.
An error has occurred
Please go to Chapter 8 “Trouble Shooting” to repair the error.
This device SHALL NOT be disposed of in residential waste.
Please go to Chapter 10 “Recycling and Disposal” for proper
treatments.
No unauthorized perforations or modifications
Any unauthorized perforations or modifications are
strictly forbidden. If any defect or damage
(device/person) is occurred, Envertech shall not take
any responsibility for it.
Item Description
A
AC Connector
DC Connectors
L-type Antenna
Grounding Screw
E
LED Light
F
Wall Bracket Hole
1
2
U
ser Identification Number
-40℃ to +65℃
Temperature(℃):
Operating Range (Vdc):
16V~60V
Normal Voltage?(Vac):
220/230V
MPPTV oltageR ange (Vdc):
22V~50V
Current (Max. Continuous) (A):
3.63A
Max. DCI nput(Vdc):
60V
Frequency?(Hz):
50Hz/60Hz
Max. Input Continuous Current?(A):
14Ax2
Power FactorR ange:
+/-0.90
Max. Input Short-Circuit Current (A):
25A Maximum Units PerB ranch: 6
Power (Max. Continuous) (W):
800W
Overvoltage Category: OVCIII (AC Main), OVC II ( PV)
Ingress Protection (IP):
IP67 ProtectiveC lass: Class I
Model: EVT800
www. envert ec.com
Envertech(S hanghai)Corporation LT D.
PV Microinverter
ABCDEF