Envion Ionic Pro Compact CA200 - Operating the Ionic Pro Compact Ionic Air Purifier; Getting Ready; Controls and Settings

5 6
OPERATING THE IONIC PRO
®
COMPACT
IONIC AIR PURIFIER
Getting Ready
Locate a level surface on which to place your Ionic Pro
®
Compact ionic air purier and a
grounded 120v outlet (follow warnings described in the “SAFETY INSTRUCTIONS”
section of this manual). Position your Ionic Pro
®
Compact ionic air purier at least one foot
(12 inches) from the wall.
Plug in the unit. You are now ready to turn on your Ionic Pro® Compact ionic
air purier!
Controls/Settings
1. ON/OFF BUTTON Turns unit on and o.
2. LO At this setting, the unit will cycle ON and
(low output indication light) OFF. It will cycle ON for approximately 25
seconds, and then rest for 25 seconds. is
cycling will continue as long as the unit is in
LO mode.
3. HI At this setting, the unit stays ON continuously.
(high output indication light)
4. CLEAN is red light goes on when your Ionic Pro®
(indication light) Compact ionic air purier needs to be cleaned,
or the unit is experiencing some other problem.
See the “CLEANING & MAINTENANCE”
and “TROUBLE-SHOOTING” sections.
5. WIRE CLEANING MECHANISM is is used to clean the internal ionizing wires.
See “CLEANING & MAINTENANCE” for
full details.
6. REMOVABLE CAP Lift o the Removable Cap to locate collection
blades for cleaning (as described in
“CLEANING & MAINTENANCE” section).
6. REMOVABLE CAP
5. WIRE CLEANING
MECHANISM
3. HIGH OUTPUT
INDICATION
LIGHT
2. LOW OUTPUT
INDICATION
LIGHTS
1. ON/OFF BUTTON
4. CLEAN INDICATION
LIGHT
OPERATING THE IONIC PRO® COMPACT IONIC AIR PURIFIER OPERATING THE IONIC PRO® COMPACT IONIC AIR PURIFIER
CA200_ENV_050511.indd 5-6 5/10/11 10:08 AM