2.4) To change the readings on your R1+ Electric Scooter
screen, press the mode button to scroll through.
▪ Time
▪ Trip
▪ Odometer
▪ Distance
▪ Voltage
▪ Channel
Pressing and holding the mode button will clear the “Trip” log.
2.5) To change the speed settings, press the power button
once. This will cause the speed setting symbol to flash. Once the
speed setting symbol is flashing press the mode button to
change the speed setting. Do not forget to press the power
button again to lock the speed setting.
2.6) Remote Fob Symbols
Power On (Press twice to power up)
Unlock (Press twice to turn off)
Lock (Press twice to lock)
Mute (Press twice to mute)
To Next Page
Loading...
