EasyManua.ls Logo

Envirovent PIV - User Guide for Resident

Envirovent PIV
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PIV & MIV Air Source / Inline
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
9
In conditions between 19°C - 25°C the units will increase air flow rate
by 10%. In hot conditions above 25°C the units will temporarily switch
off to avoid bringing hot air into the property from the loft space.
The PIV unit uses a single 200mm diffuser to provide air into a hallway
or landing area.
The MIV unit uses two 100mm diffusers to provide airflow to separate
locations within the building. It is normally required for applications
where:
a) The hallway is small.
b) Limited heating is available.
c) The loft hatch fills the hallway ceiling.
d) Airflow is required in a remote area such as a bedroom.
Option 1
If a higher airflow is required in the hallway, position
that diffuser a shorter distance from the unit.
Other room
(lower flow rate)
Hallway
(higher flow rate)
Option 2
If a similar airflow is required in the hallway, position
both diffusers at similar distances from the unit.
Other room
(similar flow rate)
Hallway
(similar flow rate)

Other manuals for Envirovent PIV

Related product manuals