Need help?Do you have a question about the Envirovent SILENT 125 and is the answer not in the manual?
General| Diameter | 125 mm |
|---|---|
| Noise Level | 26.5 dB(A) |
| Power Consumption | 16 W |
| Voltage | 220-240 V |
| Airflow | 185 m³/h |
| IP Rating | IP45 |
| Duct Diameter | 125 mm |
| Frequency | 50 Hz |
| Type | Axial |
Ensure mains supply is disconnected before installing or wiring the unit.
Details on mounting, hole sizes, duct diameters, and fixing the extractor fan.
Wiring diagrams for SILENT S fans using light switch or independent switch.
Details on the adjustable over-run timer function for SILENT T models.
Information on the SILENT-100 IT model with over-run timer and automatic start.
Overview of the SILENT HT model featuring an electronic humidistat and timer.
Configuring the 'Interval' function using dip-switch 1 and time settings with switches 2 and 3.
Configuring humidistat levels (60-90%RH) and over-run timer (1-30 min) via dip-switches.
Details on the start-up timer function, delaying extractor activation for short periods.
Description of automatic operation based on humidity and override via external switch.
Details on the SILENT-100 PIR model with motion detection and run-on timer.
Information on SILENT P models using a pullcord switch and their wiring diagram.
Instructions for maintaining the fan equipment, including electrical isolation and cleaning.
Guidelines for recycling the fan materials and packaging according to EEC Standards.
Advice against dismantling or removing parts, and consequences for the guarantee.
Details of the parts-only warranty for fans supplied by EnviroVent and installed by a third party.
Covers proof of purchase, installation requirements, unauthorized tampering, and exclusions.
To Next Page