EasyManua.ls Logo

Envirovent MEV SPIDER - User Manual

Envirovent MEV SPIDER
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MEV SPIDER
VENTILATION UNIT INSTALLATION GUIDE
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
DO NOT THROW AWAY
Question and Answer IconNeed help?

Do you have a question about the Envirovent MEV SPIDER and is the answer not in the manual?

Envirovent MEV SPIDER Specifications

General IconGeneral
BrandEnvirovent
ModelMEV SPIDER
CategoryFan
LanguageEnglish

Summary

Safety

Installation Location

Check space, access, servicing, and relation to open-flues.

User Responsibilities

Unit not for unsupervised children or persons with reduced capabilities.

Electrical Connection

Wiring and Regulations Compliance

All wiring must comply with Building Regulations and IET Wiring Regulations.

Diagrams and Specifications

Unit Dimensions and Access

Shows overall unit dimensions and minimum area required for access.

Ducting Compatibility

Details compatibility of extract and atmosphere spigots with duct sizes.

Wiring and Connections

Local Isolator Connection

Connect unit to mains via local isolator and earthed supply.

Switch Live Functionality

Wiring the black switch live core for boost mode activation.

Product Overview

System Description

Continuous mechanical extract ventilation for healthy living environments.

Performance and Features

Discusses airflow, suitability for properties, and humidity tracking.

Box Contents and Preparation

Pre-installation Checklist

Key checks before starting installation to ensure suitability.

Installation Steps

Mounting the Unit

Step-by-step guide for physically securing the unit to the mounting surface.

Installation Steps (Continued)

Spigot and Duct Installation

Instructions for selecting, fitting, and securing spigots and ducts.

Installation Steps (Continued)

External Termination and Ductwork

Fitting external termination and connecting ductwork between valves and the unit.

Installation Steps (Continued)

Final Wiring and Commissioning Access

Wiring the unit to the isolator and accessing the commissioning keypad.

Commissioning Procedure

Setting Ventilation Rates

Steps to set ventilation rates, including entering commissioning mode and adjusting flow.

Commissioning Procedure (Continued)

Adjusting Airflow Rates

Using buttons to adjust boost and trickle flow rates for each room.

Humidity Sensing Function

How the unit's fan speed adjusts based on detected humidity levels.

Boost Mode Operation

Wired Boost Switch

How to activate and deactivate boost mode using a wired switch.

Wireless Remote Control

How to activate and deactivate boost mode using the wireless remote.

Remote Control Management

Pairing Additional Remotes

Instructions for pairing a new remote control to the unit.

Remote Battery Replacement

Steps for safely replacing the battery in the wireless remote control.

Technical Specifications

Airflow Performance Data

Graph illustrating static pressure versus airflow rate for different spigot configurations.

Post-Installation Checks

Installation Verification Checklist

A checklist to confirm all installation requirements have been met.

Spares and Accessories List

List of available spare parts and accessories with their order codes.

Maintenance Guidelines

Unit Cleaning Procedure

Instructions for cleaning the unit, including removing the motor plate.

Product Warranty Information

Warranty Terms and Conditions

Details on warranty coverage, exclusions, and proof of purchase requirements.

Related product manuals