EasyManua.ls Logo

Envirovent MEV SPIDER - Boost Mode Operation; Wired Boost Switch; Wireless Remote Control

Envirovent MEV SPIDER
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MEV Spider
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
13
Wired Boost Switch (MEVS-H only)
The wired boost switch can be pressed to manually activate boost
mode. Turn the switch off to deactivate the boost mode.
Wired Switch Live Boost (MEVS-H and MEVS-W)
The Switch Live Boost switch (this might be a bathroom light switch)
can be pressed to manually activate boost mode. Turn the switch off
to deactivate the boost mode.
Wireless Remote Control (MEVS-W only)
To manually activate the boost function:
Press the button once.
The green LED will light up and the unit will enter boost mode for 20
minutes then automatically return to normal mode.
To manually deactivate the boost mode, repeat the above steps.
If the switch live connection is turned on then boost cannot be
cancelled until the switch live connection is turned off.
Red LED
Green LED
Remote control button

Related product manuals