Envision Professional G22LWK User Manual

OSD Functions
Auto Image Adjust : Auto adjust Horizontal Position, Vertical Position,
Phase (Fine Tune) and Clock (H. Size) of the screen. Available in
Analog mode only.
Contrast : Adjust the foreground white level of screen image.
V : increase contrast, W: decrease contrast.
Brightness : Adjust the luminance of the video.
V : increase brightness, W : decrease brightness.
Input Select : Select Analog (D-sub) or Digital (DVI) Input
Audio Menu : Adjust the audio functions.
Volume : Adjust the volume of speaker output.
Mute : Turn the Mute ON/OFF.
Color Adjust : Select the color temperature between 9300, 6500, 5400,
and User Color to meet user’s preference.
9300 : Adds blue to screen image for cooler white.
6500 : Adds red to screen image for warmer white and richer red.
5400 : Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press▼ or ▲button to adjust selected color.
Information : Display the information regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
Horizontal Size : Adjust the width of the screen image.
W : decrease the width of screen image, V : increase the width of screen
image.
H./V. Position : Adjust the horizontal and vertical position of the video.
H. Position : V : move screen to the right, W : move screen to the left.
V. Position : V : move screen up, W : move screen down.
6

Envision Professional G22LWK Specifications

General

Brand	Envision
Model	Professional G22LWK
Category	Monitor
Language	English