Sects 3.2.1/3.2.2: main acq
loop and 3.2.2 blind offset
precision
---
New section 3.3 about
examples of OBs
preparation with p2pp3
especially regarding the
acqs (direct or blind offsets)
---
new section 1.6 regarding
the acknowledgements
---
warning about the snapshots
during the acquisitions
offsets that will not be saved
anymore, only last
snapshots end of acquisition
kept.
---
warning about the exposure
times of all calibration
frames that will be revised.
---
warning about the
wavelength calibration at
night that should be
performed with 2dmap
template instead of ARC.
Back to format .doc
Introduction of the
XSHOOTER imaging mode
(new sect 4), comments in
various sections
Minor changes every where