EasyManuals Logo

EP Equipment CPD15/18/20FVD8(-C) User Manual

EP Equipment CPD15/18/20FVD8(-C)
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
REV. 09/2022
J9
Lithium batteries are strictly prohibited from overcharging and over discharging.
1. The normal charging temperature range of the battery is: 5°C~40°C.
2. The voltage dierence between the maximum and minimum cell voltages during charging
is less than 0.1V.
3. The lithium battery voltage matches the charger voltage.
4. The charger should be periodically checked for charging over voltage protection device.
CAUTION
WARNING
Charging procedure:
Move the truck close to the charger, turn o󰀨 the key switch;
Before charging, make sure the voltage of the battery matches that of the charger;
Connect the charger and the battery;
Check whether the data displayed on the indicators of charger and battery is normal or not;
Charging
This battery can only be charged with the vehicle-specic charger, other chargers may cause
battery damage.
The normal charging temperature range of the battery is: 5°C ~ 40°C, please do not charge
in the environment beyond the normal temperature range;
If the battery is not fully charged in specied time, check the max. voltage of the cells of the
battery, if it is higher than 3.65V, stop charging it immediately, and contact the after-sales
service.
During the charging operation, it is necessary to have professional personnel to operate
and care, in order to ensure that the charging plug and socket work normally without heat,
to ensure that the charging device works normally, to ensure that the battery pack and its
protection circuit work normally, and the whole power supply system has no sign of short
circuit, over current, over temperature or overcharge.
When charging, connect the battery to the charger; after starting charging, the circular
display meter will display the total voltage, the maximum and minimum cell voltages, power,
temperature, charging current and other information; pay particular attention to the charging
current and the maximum and minimum cell voltages, as well as the voltage di󰀨erence
between them; if there is abnormality, stop charging in time and contact the after-sales
service department for solutions.
Charging in non-charging area is prohibited;
No modication of vehicles;
Do not use irregular charging sockets;
The net height of the charging area shall be higher than 5m, and the safe distance from other
areas shall be greater than 5m.
1.4.3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EP Equipment CPD15/18/20FVD8(-C) and is the answer not in the manual?

EP Equipment CPD15/18/20FVD8(-C) Specifications

General IconGeneral
BrandEP Equipment
ModelCPD15/18/20FVD8(-C)
CategoryForklifts
LanguageEnglish

Related product manuals