What to do if my EP Equipment Trucks does not start?
If your EP Equipment Truck doesn't start, there could be several reasons. First, ensure the key switch is in the “ON” position. Next, check the battery charge and charge it if necessary. Also, make sure the truck is not in charge mode by interrupting charging. Finally, test the fuses to see if any are faulty.
Why load can not be lifted by EP Equipment Trucks?
If the load cannot be lifted by your EP Equipment Trucks, the hydraulic oil level may be too low, so check it. Also, the load might be excessive, so note the maximum capacity from the data plate.
General safety rules for operating the truck in various conditions.
Description and function of controls on the truck's handle.
Daily inspection and preparation steps before operating the truck.
How to operate the truck for movement, turning, and stopping.
General safety precautions for handling batteries and electrical systems.
Safety measures and procedures for charging the battery.
Step-by-step guide for removing and installing the truck's battery.
Regular maintenance work to ensure sustainable and reliable use of the forklift.
Identification and resolution of common truck faults.
General| Load Capacity | 2000 kg |
|---|---|
| Overall Width | 1150 mm |
| Power Source | Electric |
| Battery Voltage | 48 V |
| Tire Type | Solid |
To Next Page