Warning!
Turning the key switch “on” does not make the forklift truck move, if the travel
combination switch is not in the neutral position or the accelerator pedal is
being pressed. Error code maybe appear, don’t worry about it. When the forklift
can be operated then the error code should be disappeared.
1.3.1Steering wheel[4]
The steering wheel is operated in the conventional manner, that is, when the wheel is
turn right , the truck will turn to the right; When the wheel is turn left, the truck will turn
to the left. When press the horn button,it will sound.
1.3.2key switch[23]
The key switch has two “ON / OFF”
position. Truck power supply is break off
when the key turn "OFF". Truck power
supply is turn on when the key turn "ON".
You should push the travel combination
switch to neutral and release the
accelerator pedal, then turning the key
switch to “on” position clockwise.
Removing the key prevents the truck from being switched on by unauthorised
personnel.
To Next Page
Loading...
Need help?
General
