What to do if my ep Truck does not start?
If your ep Truck doesn't start, there could be a few reasons. First, make sure the key switch is in the "ON" position. If it is, check the battery charge and charge it if necessary. Also, ensure the truck is not in charge mode; if it is, interrupt the charging process.
Why can't the load be lifted on my ep Truck?
If the load cannot be lifted by your ep Truck, it might be due to a low hydraulic oil level, so check the hydraulic oil level. Another reason could be that the load is too heavy, so note the maximum capacity specified on the data plate.
Crucial safety guidelines to prevent injury and ensure safe operation of the truck.
Explains the functions and controls located on the truck's handle.
Describes the function of the key switch for controlling the truck's power.
Essential safety rules and precautions for operating the pallet truck.
How to move, steer, and brake the pallet truck safely.
Procedures for handling loads safely and preventing accidents.
Steps to ensure the truck is parked safely and correctly.
Safety precautions when working with batteries, including fire and shock protection.
Instructions and safety rules for charging the truck's battery.
Safety and environmental considerations during maintenance operations.
General safety rules applicable to all maintenance tasks.
Identifies common faults and their likely causes for quick diagnosis.
To Next Page
General
