REV. 12/2020
11
B
Emegency reverse switch
Braking can be accomplished by changing
the direction of travel.
Press the reverse switch in the opposite
direction until the truck comes to a stop,
then release the drive switch.
Emergency stop switch
Press the emergency stop switch, and then
all the electrically propelled functions will be
interrupted.
Regenerative braking
Release the drive switch. The drive switch will
automatically return to the initial position and
the vehicle will begin to enter the regenerative
braking state. When it decelerates
to <1 km/h, the electromagnetic brake will
bring the motor to a stop.
Open the drive switch; if the drive switch
cannot quickly return to the initial position
or resets very slowly, identify the cause and
rectify the fault.
CAUTION
To Next Page
Loading...
