Epelsa ECO MULTIFUNCTION - 3 Turning on the Scale and Entering the Main Set-Up Menu

GBS-ECO-MF-V02
4
3. TURNING ON THE SCALE AND ENTERING THE MAIN SET-UP MENU
The scale is turned on and off by pressing the key. When turned on, it
starts a cycle test (it counts from 0 to 9).
During the initialization process (cycle test), you can enter the unit's set-up menu
by pressing the internal set-up key, located on the scale's main board, which is
accessed from the scale bottom (as explained in the section "Connections").
When you enter the set-up menu, the display shows:
You are now in the scale's Installation Menu. Here, you will program all the
options using the keys specified in the section "Description of the keypad".
NO
ERASE
GENER
Max 15 kg
Min 100 g
e= 5 g
I I I
kg
kg
Pcs
T
PT