Epever MT52 - Page 28

24
Under voltage
warning voltage
10.5 V
21.0 V
24.5 V
45.5V
49.0V
9~17V
Low voltage
disconnect voltage
9.3 V
18.6 V
21.7 V
40.3V
43.4V
9~17V
Discharging limit
voltage
9.3 V
18.6 V
21.7 V
40.3V
43.4V
9~17V
① The battery parameters under the "User" battery type is 9~17V for LNCM3S.
They should x2 for LNCM6S/LNCM7S, and x4 for LNCM13S/LNCM14S.
 When the battery type is "USE," the Lithium battery voltage parameters follow
the following logic:
A． Over Voltage Disconnect Voltage>Over Charging Protection
Voltage(Protection Circuit Modules(BMS))+0.2V;
B． Over Voltage Disconnect Voltage>Over Voltage Reconnect Voltage=Charging
Limit Voltage ≥ Equalize Charging Voltage=Boost Charging Voltage ≥ Float
Charging Voltage>Boost Reconnect Charging Voltage;
C． Low Voltage Reconnect Voltage > Low Voltage Disconnect Voltage ≥
Discharging Limit Voltage.
D． Under Voltage Warning Reconnect Voltage>Under Voltage Warning Voltage≥
Discharging Limit Voltage;
E． Boost Reconnect Charging voltage> Low Voltage Reconnect Voltage;
F． Low Voltage Disconnect Voltage ≥ Over Discharging Protection Voltage