Need help?Do you have a question about the Epever MT75 and is the answer not in the manual?
General| Model | MT75 |
|---|---|
| Communication | RS485 |
| Display | LCD |
| Type | Solar Charge Controller |
| Rated Current | 75A |
| Rated Voltage | 12V/24V/36V/48V Auto |
| Input Voltage | 12V/24V/36V/48V Auto |
| Max. Current | 75A |
| Temperature Compensation | -3mV/℃/2V(Default) |
| Storage Temperature | -35°C to +80°C |
Pre-installation checks and general mounting options for the remote meter.
Step-by-step guide for mounting the remote meter on a wall.
Instructions for installing the remote meter using surface mounting.
Detailed explanation of the symbols and parameters displayed on the LCD screen.
Lists and explains error codes specific to the solar controller.
Lists and explains error codes specific to the inverter.
Basic setup for monitoring and controlling loads with MT75.
Enhanced application for monitoring status and controlling inverter start/stop.
Utilizes modules for WiFi/BT/USB, enabling remote monitoring and control via APP/PC.
Advanced remote control of inverter start/stop for extended system lifetime.
To Next Page
