Epever MT52 - Device Password; Factory Reset

30
time.
Month-Day-Year H: M: S
It indicates the Solar controller's internal clock.
4.9 Device password
The solar controller's password could be modified via the device password page. The
device password is a 6-digit figure which is required before entering the modification
mode of "Control parameter," "Load setting," "Device parameter," "Device password,"
"Factory reset" pages. The page of
the device password in the diagram shows as below:
Note: The default password of the solar charge controller is" 000000".
4.10 Factory reset
The solar charger controller's default parameters could be restored via the Factory reset
page. Including the "Control parameter," "Load setting," "Charge mode," and "Device
password" could all be restored to the factory defaults (the factory default password of
the devices is "000000").
Device PSW
OriPsw:xxxxxx
NewPsw:xxxxxx