Epever MT52 - Page 30

26
controller manual.
1. Manual control
Mode
Introductions
ON
The load is on if the battery capacity is enough and no abnormal
conditions happen.
OFF
The load is off all the time.
2. Light On/Off
Light On voltage
(Night
threshold)
The load output is automatically turned on when the below
situations occur at the same time:
1. The PV input voltage is lower than the Light On voltage.
2. The battery capacity is enough.
3. No abnormal conditions happen.
Light Off voltage
(Day
threshold)
When the PV input voltage is higher than the Light Off voltage, the
load output is automatically turned off.