The PV input current exceeds the rated
current.
The MOSFET of the reverse polarity
protection (RPP) is short-circuited.
The MOSFET of the reverse polarity
protection (RPP) breaks.
The MOSFET of the charge driver is short-
circuited.
The input power is not connected
successfully.
The input voltage is very high.
The input voltage is very low.
The controller is over-temperature.
The communication is timeout.
The battery is over high temperature.
The battery is over low temperature.
The internal resistance of the battery is in
error.
The rated voltage is in error.
The battery voltage exceeds the over
voltage disconnect (OVD) voltage value.
The battery voltage is lower than the under