To Next PageTo Next Page
Need help?Do you have a question about the Epilog FusionPro 32 and is the answer not in the manual?
General| Laser Type | CO2 |
|---|---|
| Resolution | 1200 dpi |
| Software | Epilog Dashboard |
| Work Area | 32 x 20 in (812 x 508 mm) |
| Print Area | 32 x 20 in (812 x 508 mm) |
| Laser Power | 30, 40, 50, 60, or 75 watts |
| Connectivity | Ethernet, USB |
| Laser Source | CO2 Laser Tube |
| Operating Modes | Raster, Vector |
| Supported File Formats | AI, BMP, DXF, PDF, JPG, PNG |
| Cooling System | Water-cooled |
| Power Requirements | 110V or 220V |
Details on potential fire hazards from laser use and essential safety precautions.
Discusses laser safety standards and proper installation/use guidelines.
Details electrical hazards and safety precautions for the laser system.
Explains safety features and compliance with industry standards.
Lists essential do's and don'ts for safe laser operation and maintenance.
Instructions for safely unpacking the laser system from its packaging.
Steps for connecting the necessary exhaust system to the laser.
Instructions for connecting the laser system to an electrical power source.
Guide on establishing a connection between the laser and a computer.
Instructions for configuring the laser system's IP address for network connection.
Overview of the Epilog Job Manager software and its features.
Step-by-step process for installing the Epilog Job Manager software.
Solutions for common installation problems with the Job Manager software.
Introduction to the Epilog Job Manager interface and basic usage.
Saving and importing laser process settings for different materials.
Saving and importing job-specific configurations for future use.
Initial steps for sending a design file to the laser via the Dashboard.
Dividing, ordering, and merging laser job processes.
Using the live camera feed to precisely position and edit artwork.
Saving and configuring file-related and job-specific settings.
Preparing artwork files for different laser operation modes.
System for precise artwork placement using an overhead camera.
The 7-inch capacitive touch screen for controlling the laser system.
Feature to remove gases and reduce flare-ups during cutting.
Explains both automatic and manual methods for focusing the laser.
Using color to split jobs into separate processes for custom settings.
Location and function of the emergency stop button for immediate shutdown.
Details on the task plate and vacuum hold-down table features.
Explanation of the exhaust system's function and airflow.
Information on how to contact Epilog's technical support team.
Procedures for calibrating the laser system's cameras.
