Safety and operating instructions
© Construction Tools PC AB | 9800 1273 01 | 2020-04-03
Original Instructions
27
11.3 Noise declaration statement
SB 702 SB 1102
Sound pressure
1
dB(A) 94 94
Sound power
2
dB(A) 122 123
1
Sound pressure level according to ENISO3744 in accordance with directive 2000/14/EC at 10metres distance.
2
Guaranteed sound power according to ENISO3744 in accordance with directive 2000/14/EC inclusive spread in pro-
duction.
These declared values were obtained by laboratory type testing in accordance with the stated directive or standards and
are suitable for comparison with the declared values of other tools tested in accordance with the same directive or stan-
dards. These declared values are not adequate for use in risk assessments and values measured in individual work
places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and de-
pend upon the way the user works, in what material the breaker is used, as well as upon the exposure time and the
physical condition of the user, and the condition of the breaker.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values, instead of val-
ues reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no con-
trol.
To Next Page
Loading...
Need help?
General
